| Power Source |
220 – 230 V AC, 50/60 Hz
24 V DC (M4 screw terminal) |
| Rated Output |
120 W |
| Power/Current Consumption |
AC operation: 260 W (rated output), 110 W (EN60065),
24 V DC operation: 7.0 A (rated output), 2.8 A (EN60065) |
| Frequency Response |
50 Hz – 20 kHz (±3 dB) |
| Distortion |
2 % or less at 1 kHz, rated power |
| Input |
MIC 1: -60 dB(*1), 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins)
MIC 2 – 3: -60 dB(*1), 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
AUX 1 (MOH): -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack
AUX 2: -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack
AUX 3: -20 dB(*1), 10 kΩ, unbalanced, combined type of XLR-3-31 and phone jack
TEL(*2): -20 dB(*1), 10 kΩ, electronically-balanced, M3 screw terminal
EMERGENCY: 0 dB(*1), 600 Ω, unbalanced, M3 screw terminal |
| Output |
REC: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
LINE 1, 2 (*3): 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
MOH: 0 dB(*1), 600 Ω, transformer balanced, M3 screw terminal
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/83 Ω), individual selector switch,
M4 screw terminal
DIRECT SPEAKER OUT: High impedance (100 V line/83 Ω), M4 screw terminal
Low impedance (4 – 16 Ω), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.) |
| Phantom Power |
ON or OFF for each MIC1 – 3 with switch setting (+17 V DC) |
| S/N Ratio (Band Pass : 20 Hz – 20 kHz) |
100 dB or more (Master volume: min)
76 dB or more (Master volume: max)
60 dB or more (MIC 1 – MIC 3)
76 dB or more (AUX 1 – AUX 3)
90 dB or more (TEL)
96 dB or more (EMERGENCY) |
| Tone Control |
Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz |
| Control Input |
TEL: No-voltage make contact input, open voltage: 24 V DC, short-circuit: 5 mA or less,
M3 screw terminal
EMERGENCY(*4): No-voltage make contact input, open voltage: 24 V DC,
short-circuit: 10 mA or less, M3 screw terminal |
| Control Output |
Power remote: Open collector output, withstand voltage: 35 V DC,
control current: 50 mA or less, M3 screw terminal |
| Chime |
1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting,
activated at MIC 1’s DIN or CONTROL TEL terminal. |
| Indicator |
5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED,
TEL LED |
| Priority |
EMERGENCY: Overrides other inputs
TEL: Overrides other inputs except ‘EMERGENCY’, ON/OFF selectable with switch setting
MIC 1: Overrides other inputs except ‘EMERGENCY & TEL’,
ON/OFF selectable with switch setting |
| Operating Temperature |
-10 ℃ to +40 ℃ |
| Finish |
Panel: ABS resin, black, hairline
Case: Steel plate, black |
| Dimensions |
420 (W) × 107.7 (H) × 367 (D) mm |
| Weight |
12.6 kg |
| Accessory |
Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2 |
| Option |
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Input transformer: IT-453A |
